2013 Ferretti Yachts 800-19 EVOLUTION24m

Main Deck:

The Salon decor is sleek and modern in subtle, neutral colors creating a relaxing ambiance furnished with leatherette covered sofas and wood cabinetry finished with leather.  The wood walls are completed with leather trims and the floors are of soffit wood flooring. Large windows throughout bring in plenty of natural light.  Forward, on the port side of the salon is a formal dining table with leather seating for eight.  Across from the dining area is a staircase leading down to the guest cabins or up to the top deck.  Continuing forward via the companion way's wood-finished stairs is the Wheelhouse on the port side.  The Galley, which is located just forward of the Wheelhouse, is equipped with Miele appliances and Bosch appliances. The counter tops are quartzite marble and faucets are stainless steel.  Going all the way aft is the open-air aft deck. This area has a dining table with chairs and settee seating for alfresco dining.  The fold-down transom creates the perfect beach club and ideal water sports platform. 

Upper Deck:

The stairwell to the starboard side takes you to the upper deck where there are chaise lounges and a large sunbed with padded cushions for relaxing or sunning plus an awning for shade.  A dining table or a game table is provided with banqette seating for cocktails and dining.  The captain has a steering station forward.  On the bow are over-sized sun pads for sunning.  

Lower Deck:

Below deck are four (4) cabins, all with ensuite bath.  The aft Master cabin is full-beam as well as the VIP cabin. An upper/lower cabin is located on the starboard side and a full guest cabin is on the port side.
All the cabins have carpeted flooring with wood and canvas walls, wood cabinets with vinyl trimwork throughout.

Machinery:

-Engines: Twin MTU 1948 HP -12V 2000 M94 / Hours: P-1796  S-1802
-Fuel: Diesel
-Propulsion: Prop Shaft
-Gearboxes: Gear Model N.: ZF2075V / ZF2075V
-Steering: System by BCS. Electro-hydraulic pump & single ram on port tiller arm.
-Port and STBD tillers are connected by tie bar
-Rudders: Two (2) balanced style measuring 35-1/2” x 19”. Positioned outboard of shaft line
-Propellers: Two (2) five-blades by Rolla
-Shafting: Two (2) x 95 mm, straight shaft supported by one (1) strut per
side. FLUITEN raw water lubricated dripless shaft seals
-Trim Tabs: Two (2) x Planning surface style, electro-hydraulic controlled
by BCS
-Thrusters: Bow: SIDE POWER SP 285TCi - 48V / Stern: SIDE POWER-48V
-Stabilizers: Two (2) x MITSUBISHI Anti-Rolling Gyro
-Generators: Two (2) ONAN - 2012 Model: 19MDKBV-7334B /Hrs: P-3138 S-2970
-Rating: 19kW @ 60Hz – 120/240V – 1Ph

Note: Water separator from CENTEK - STBD side. Generator’s STAR/STOP command from Generator, main electrical panel in engine room and Gi8 System.

 Electricity:

-Main AC 120/220V panel located in E/R
-The AC and DC system grounds are bonded as required
-Neutral/Ground: As required, AC neutral and grounding conductors
are not bonded on the vessel;
-G.F.C.I. in wet areas (heads and galley)
-Other Outlets: 110V throughout boat

Batteries:

-DC Panel: Main DC 24V panel is located in E/R
-Alternator: One each per engine=2. Port dedicated to Service bank -
STBD dedicated to Engine bank
-Battery Switches Service, Parallel, engines and Direct Battery switch
on crew cabin access
-Batteries: - ten (10) x INTIMIDATOR 12V – model: 8A4D lead acid
batteries connected in series and parallel to provide 24V to the house
battery bank
-Service battery chargers and inverter Main engines battery charger
-Refrigerator’s inverter Stern thruster battery charger
-Four (4) x POWER KING 12V – model: 8D-XHD leadacid batteries
connected in series and parallel to provide 24V to engine battery bank
-One (1) x INTERSTATE 12V model: 4DLT-VHD for each generator (total
of two (2)
-Four (4) INTERSTATE 12V model: 31M-AGM batteries connected in
series for 48V to stern thruster
-Eight (8) TUDOR 12V - model: TK700 in crew cabin bilge, connected in
series & parallel to for 48V to bow thruster

Air Conditioning:

-Circulating pump: CALPEDA NMM 25/12A/A-R - 220V – 60Hz - 75 HP
located in engine room, STBD side aft
-Chiller system CALPEDA with three (3) compressors located in E/R,
STBD side aft – model: PCWM/FCL27003co31.9 – 108,000BTU
-Raw water pump: SCOT model: 369800-X41488- E12 – 220 Vac located
in engine room, center bilge;
-Air Handler's throughout
-Reverse A/C System for heat

Galley & Laundry:

Miele Convection Oven

GE Side-by-Side Refrigerator

Quartzite Marble

Bosch 4 Burner Stove

Miele "Futura Dimension" Refrigerator

Navigation Equipment:

Furuno Navnet 3D Control

Furuno FM-4721

Urania Compass

Rudder Indicator

Furuno RD-33

Furuno Navpilot

Deck Equipment:

Raritan Icemaker - Aft Deck

32” Sunbrite outdoor TV - Aft Deck

(4) underwater lights under spoiler

Bow and stern thrusters, docking station

Bow sun pad

Bow sofa

Safety & Security Equipment:

-International navigational running lights, anchor light
-Personal Floatation Device x 12
-Throwable Devices: one (1) x donut throwable
-Sound Signals: Horn
-Visual Distress Signals: Flares kit
-Vapor Detector, Gasoline, Propane, Carbon Monoxide, etc.
in every cabin and engine.
-Main brain unit smoke alarm system by SMARTLINE, in engine room
-Life Raft / Floats: two (2) x EV 6 people each
-Life Lines and Harnesses
-Fire Suppression - Two (2) x 72lbs HFC-227 fixed tank in engine room
-Fire Suppression (portable):
- one (1) x 3lbs ABC powder fire extinguisher in E/R
- one (1) x 3lbs ABC powder fire extinguisher in galley
- one (1) x 3lbs ABC powder fire extinguisher in port
guest cabin
- one (1) x 3lbs ABC powder fire extinguisher in STBD
guest cabin
- one (1) x 3lbs ABC powder fire extinguisher in VIP
- one (1) x 3lbs ABC powder fire extinguisher in master
cabin
- one (1) x 3lbs ABC powder fire extinguisher in port
crew cabin
- one (1) x 3lbs ABC powder fire extinguisher in STBD
crew cabin
- one (1) x 3lbs ABC powder fire extinguisher in flybridge
-Re-boarding Ladder: electro-hydraulic 24Vdc
-Fire suppression water system (connections in anchor locker) Pump GIANNESCHI 24V -0,44 Kw -type: ACB 90E -in engine room- port side

 Tender:  Williams Tender - Turbojet 285

 

Shipyard - List of work done in December 2022

• new bottom paint (total sandblasting, and new bottom paint application) 
• new cutless bearings 
• both propellers calibration 
• both shaft calibration 
• hull and superstructure polishing 
• teak sanding 

 

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.