2013 Custom HH42 Hakes 42 Marine13m

Construction:

Engineered to ISAF Category 1 Safety regulations / ISO Regs. Hull, Deck & Superstructure

 

• Structural Engineers: SDK Structures USA.
• 100% carbon prepreg / cured at high temperature.
• Thermoformed damage tolerant foam cores.
• Engineered weight controlled toughened core adhesive films.
• Bulkheads / Structures: Carbon prepreg.
• Finite Element Analysis of keel floor and principal structures.
• Unique monocoque single piece bottom shell structure.
• Weight controlled toughened core adhesive films.
• 100% carbon secondary bonding. 

Hull/deck

• 100% carbon prepreg / cured at high temperature
• Thermoformed damage tolerant foam cores
• Engineered weight controlled toughened core adhesive films
• Engineered to ISAF Category 1 Safety regulations / ISO Regulations
• Hull is very well and strong build, and can resist  very tough conditions
  
  

Keel & Rudder:

• New Keel 3.2M draft from McConaghy China, 2019, fabricated weldox 700 steel keel fin, cast and CNC milled bulb.
• Custom carbon tiller with Spinlock extension.
• Keel socket integral with hull shell laminate-Keel socketed to hull for easy and quick removal and installation, and enhanced safety and stiffness.
• Rudder foil is high lift with 100% carbon autoclaved prepreg stock, and 100% carbon prepreg blad.
• Bearing (JP2) are water tight self aligning.

Rigging

Southern Spars carbon rig with engineered high modulus fibre for increased stiffness and weight saving.

• Mast is fitted with 7 Halyards: Main, 2x Spin, 2x Jib, Fro, GS 
• Halyard locks x4 for: Main, Spinnaker, Jib, Fro.
• New sheets and other lines 2020
• full serviced and scanned mast and rig + paint pained / anodised to black poles 2020
• Carbon box boom, with removable carbon gas vang strut.
• Two piece rig with joiner for packing and transportation.
• Two spreader rig with carbon aerofoil spreaders.
• Twin groove headstay foil installed on forestay.
• Hydraulic Backstay Deflectors for performance adjustments using hydraulic ram.
• Main halyard lock system with floating mainsail tack.
• 1:1 main halyard with reef bullets on it.
• Internal mast jack with pump.
• Mast base with additional sliding plate and screw adjustment.
• Nitronic 50 rod rigging.
• PBO inshore running backstays, Nov 2018, Future Fibres, 18.85M, 2.4T MWL, 7EA (MN), 8.7mm dia., 2.72kg.
• Kevlar offshore running backstays, since boat launch, stainless steel end fittings, heavier duty.
• Staysail Halyard  Tylaska T8 Snap shackle. 
• Removable 1.5m long carbon prepreg bow prod with two internal tack lines.
• Spinnaker take down system( same as on TP52)
• Harken Headfoil
• Gorilla racing Headfoil
• custom forestay adjustment

Sails

Kites

• Code 0 2018 North Sails laminate
• A0-A 2015 North Sails laminate
• FRO-A 2015 North Sails laminate
• A1-A 2013 North Sails
• A1-B 2015 North Sails
• A1,5-C 10.2019 North Sails superkote 50/60
• A2-B 10.2019 North Sails superkote 60/80
• A2-A 2018 North Sails
• A2-C 2022 Quantum Bainbridge Airx 600

Headsails

• J1-c 2015 North Sails 3di
• J1D 2019 North Sails 3di raw 870 12,6dpi
• J2-B 2014 North Sails 3di 780
• J2-A 2013 North Sails 3di 780 dynema/carbon 16,8dpi
• J2C 2019 North Sails 3di raw 870 16,8dpi
• J2-D 2022 Quantum M7+ Lite skin Black 17000dpi
• J3-A 2013 North Sails 3di 780 dyneema/carbon 19,6dpi
• J3+A 2013 North Sails 3di 760 aramid/dynema 2240dpi
• J4-A 2013 North Sails 3di 760 aramid/dyneema 22,4dpi
• JT 2013 North Sails 3di 760 aramid/dyneema 14,7 dpi
• Blast Reacher 2022 Quantum M7+Cableless 14000dpi
• GS 2013 North Sails 3di 760 aramid/dyneema 12,6dpi
• SS 2015 North Sails laminate
• storm jib 2013 North Sails

Mainsails

• Storm trysail september 2013 North Sails
• MN0-D ? dakron delivery
• MN1-I September 2013 North Sails 3Di 780 (Dyneema/Carbon)
• MN2 September 2013 North Sails 3Di 760 (Aramid/Dyneema/ Carbon)
• MN3 November 2018 North Sails 3Di RAW 870 w/C-Tech battens
• MN4 may 2022 Quantum M7+ Lite skin Black

Accommodations

• Optimized open plan interior for ease of sail handling.
• Hand finished two pot paint mid section.
• 10 berths standard, 6 retracting pipecots, 2 fixed berths in the saloon with forward V-berth.
• Marine blue V-berth and saloon cushions with jockey red piping
• Enclosed head with WC and fixed basin.
• Red and White LED interior lighting / aircraft spec wiring.

Galley

• 1 burner wire frame cooker.

 

 Deck and Cockpit

• Full winches/pedestal layout available upon request 
• Carbon Tiller with Spinlock extension.
• Light weight custom carbon forward hatch with pneumatic seal, big internal radius for ease of gennaker hoist and drops.
• Composite socketed stanchions / alloy fwd rail, single composite aft aerofoil stanchion.
• Wide under deck sliding companionway hatch with carbon wash board.
• Custom light weight Hi Load soft padeyes.
• Harken carbo blocks / Spinlock XC jammers.
• Rope tail bags with moulded bolt rope tracks.
• High performance non-skid cockpit covering. Full SeaDek in cockpit, SEP 2019
• Custom Winches gear ratio
• Spin sheet Jammers

Electrics

• 180 amp ACG house battery.
• 60amp ACG engine start battery.
• Navigation lights.

Engine

Fully serviced and upgraded engine 2020

• 30hp Yanmar engine with sail drive / Gori racing propeller/42 litres fuel / deck filled.
• Integral engine box with bottom step and electronics display and controls.
• Single lever Spinlock morse-type control in cockpit side.

Safety

• Superlight Carbon Liferaft

Electronics and Navigational Gear

• Mast Bracket: 3x20/20 repeaters, 1x GFD, 1x H5000 Graphic display
• H3000 Motion CPU
• Halcyon Gyro Processor
• Halcyon Gyro Stabilized Compass ( super fast& super accuracy)
• Fastnet/ NMEA0183 Network
• NMEA0183 NMEA2000 Converter
• NMEA 2000 Network
• Navico GO-FREE wifi/ NMEA2000 wifi
• IstarGPS: Hi-Speed& accuracy GPS  NMEA/Ethernet/USB
• MHU carbon windwand
• 2x spd Sensor ( port/ Starboard)+ water temp
• Depth sensor
• Halcyon 2000
• Motion Sensor
• Baroplug (barometer+Temperature)
• New Rudder sensor
• New Deflector length sensor
• 2 x cockpit mounted digital readouts for headstay load interfaced with headstay loadcel.
• 2 x new chart plotter and related system, please check photos.
• SSB and 4G radar 
• Option for SSB: Icom IC-M802 HF/SSB with AT-140 Tuner (12VDC)-use existing old antenna and accessories.
• VHF
• RS90 Black Box VHF AIS Rx System
• HS90 wired handset and RS90 speaker.
• HS35 VHF Wireless Handset
• Glomex 3ft VHF Antenna w/20M cable
• B&G 4G Broadband Radar, 20M cable-
• NEP-2 Network Expansion Port (for radar connection)
• Radar & FleetOne antenna mounting bracket
• Junction connector set for the new removable mounting pole-extension cable (15ft) and SMA connector set for FleetOne antenna -i-joint junction for radar and AIS Gps antenna cable
• Auto pilot - to be attached to the tiller at the cockpit floor (never tested/used)

Additional

• Removable eye bolt fitting and stop for single point lifting.
• Miscellaneous tools and spares.
• 1 x fortress Anchor with warp.
• Fenders and docklines.
• Cockpit floor cover, winch covers, boat cover
• Assembled/folded Cradle for easy transportation. 

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.