1 of 19
The Swan 86 foot sailing yacht “ASPIRATION” built by the famous Nautor’s Swan shipyard is a proven world-cruising, bluewater sailing and is for sale.
From her stunning lines to her powerful performance, ASPIRATION is a yacht that has enjoyed continual maintenance and upgrades throughout her life. During the current ownership, ASPIRATION has undergone a refit in 2014 that included a new engine, new mainsail, new water-maker, rudder service, full rig service, and more.
She benefitted also from further updates in January 2016 with new air conditioning systems and a new headsail. In November 2016 she obtained new Raymarine instruments - amongst other works.
ASPIRATION’s stunning lines are by German Frers; she sports typical Nautor Swan “cruiser-racer” style with teak laid wedge decks. ASPIRATION has two cockpits – one aft-helm working cockpit and one large centre cockpit with a dining table suitable for alfresco meals. ASPIRATION has a classic-style interior in teak with satin finish. She is well suited to family use but also is excellent for entertaining guests, chartering or racing. The amidships full width salon is impressive with intricate details.
ASPIRATION is able to accommodate up to six guests in three cabins including a spacious master cabin aft with double berth, settee and en-suite bathroom; a VIP located forward of the main saloon on the port side with a double bed and en-suite bathroom; and an additional guest stateroom to starboard with twin bunk beds and an en-suite bathroom. Plus crew cabins for four.
RECENT IMPROVEMENTS INCLUDE:
Sept - Oct 2018 – New prop shaft, cutlass bearings and thru hulls. General service and antifouling
Nov 2016 – new Raymarine instrumentation including A75 multi-function display for nav station below decks, Evolution 400 autopilot with P70 display, wind displays and multi-function display.
Five new air conditioning units, January 2016, Siam Cooling Systems “Yen Dee” package.
Yanmar 6LYA, 365 Hp or 272Kw, 4 stroke, diesel, 6 cylinders in line, Turbo Aspirated new 2014.
Stainless steel Aqualoy 22 propeller shaft new 2018. Incl cutlass bearings, refurbished Max Prop etc.
Rig was unstepped and has undergone to a complete inspection and refit in 2014. The rod rigging has undergone to die penetrant test of all the heads and terminations. Diagonals shroud N4 were replaced as well some of the toggles aloft and deck toggles of the vertical and diagonal shrouds N1. The secondary stays and the backstay runners in Aramid fibres have been replaced.
Reckmann foresail hydraulic reefing system serviced by the Reckmann in Germany 2014.
• New full batten main sail 2014 North Sails made in USA, Dyneema/Carbon SRPC.
• New headsail, Challenge Performance Cruising warp drive tri-radial cut with 2 ply leach and UV cover protection.
Rudder dropped and new bearings installed 2014
Fo’c’sle fitted originally fitted with a V berth now fitted as working area, with an Electrolux EWW1273 washing machine and fitted spares storage
Ice maker installed in galley 2014. Serviced 2019.
New Hafele washing machine 2019 fitted in galley.
Refrigerator and freezer doors removed and repaired including new hardware, new gel coat on the interior surfaces and new teak veneer on exterior faces.
New Spectra MPC-3000 water maker installed 2014.
New Yamaha 60 hp 4-stroke dinghy outboard motor 2014. Serviced 2020.
Ray marine chart plotter hybrid touch with radar interface at helm in aft cockpit new 2020. (interfaces with 2016 new instrumentation)
Recent works in August 2017
Removal and of Goiot ports for re-anodizing, replacing of the rubber seals etc.
Removal of helm and replacement of roller bearings
Removal and anodizing of helm wheel shroud, including various inspection plates and aluminium items
Removal and repair, including anodizing, many running rigging blocks and various deck hardware
Removal of most of interior chrome hardware for re-chroming – door handles, strikes, etc –
Removal and service of Goiot hatches
Disassemble and service winches, including re-chrome various parts
The hull and deck are GRP sandwich construction and foam core (hand laid E-glass & Aramid fibre sandwich with foam core).
Structural bulkheads are foam cored and laminated to hull and deck.
Teak laid deck, replaced in 2005/6
Aspiration has the optional “wing keel” – the ballast keel is a lead casting with antimony.
Cast in keel bolts are of stainless steel.
Rudder of foam filled GRP with high tensile stainless steel stock.
Cable steering gear. Recessed destroyer type single wheel with elk-hide cover.
There are two watertight bulkheads - anchor locker & lazarette .
Deck Hardware & Ground Tackle
Anchor system Retractable anchor arm with recessed anchor windlass
Anchor 63 kg CQR anchor with 110m of 15mm chain
Windlass Lewmar 4000 horizontal windlass in foredeck locker
Deck Lockers 8 x deck stowage lockers in cockpit
Deck Teak laid deck
Winches 15 Lewmar winches in total with six function
Lewmar Commander 6 hydraulic unit, serviced 2018.
4 x Lewmar 110 linked with pedestals secondary are hydraulic drive
2 x auxiliary winches Lewmar 65 CST
Mainsheet winch 90 SST with electro hydraulic drive and drop-in pedestal.
All winches serviced in 2020.
1 x Yanmar 6LYA, 365 Hp or 272Kw, 4 stroke, diesel, 6 cylinders in line, Turbo Aspirated, sea water indirect cooled, marine engine new 2014.
Stainless steel Aqualoy 22 propeller shaft 2018 incl. new including cutlass bearings
Running Hours 1142.3 hours April 2020
Drive PRM 1000 Ratio 2.983:1
Controls Mechanical / cables, dual instrument panels at helm & navigation station. Fuel tanks drained and cleaned, all existing fuel polished 2018.
New exhaust hose Dec 2018.
Generator: Kohler 20E OZD 22.5 KVA, diesel generator is installed. 10,605 hours April 2020.
Air Conditioning: Five (5) reverse-cycle units 220v AC, new Feb 2016. Serviced Nov 1029. Water pump serviced Feb 2020.
Water-maker: Spectra MPC-3000 water maker (new 2014)
Ship power is 24 V DC. Deep cycle house batters 640AH new Nov 2019.
Separate battery bank is supplied for Navigation and Radio equipment.
Separate 12V battery bank is supplied for Main engine and generator starting.
Shore power, is hard wired aft with heavy duty shore power cable. Inside boat replaced 2019.
Two (2) Victron multiplus 24 VDC/70 Amp automatic battery chargers/inverters.
One (1) Mastervolt Mass 24 VDC/50 Amp battery charger.
Main engine is supplied with 2 alternators, one of which is high capacity 24V 175 Amp for house battery charging.
Three (3) Dometic / Sealand Vacuflush toilets - system overhaul 2015.
One (1) Manual Par Jabsco toilet in cabin’s head.
Holding tanks for Vacuflush toilets with diverter valves.
Emergency engine-driven high-capacity bilge pump installed
Four (4) Par Jabsco 34600-0010 high capacity bilge pumps with auto float switches, all serviced Mar 2020.
Gianneschi 24VDC high output water pressure pump
Whale Gusher 10 and Whale Gusher 30, manual bilge pumps.
Automatic pilot Evolution 400 autopilot with P70 display, (new Nov 2016), interfacing with Raymarine hybrid touch chart plotter at helm 2020. Hyraulic hoses replaced Nov 2018, hydraulic ram serviced Dec 2018. Hydraulic pump serviced Sep 2019.
A75 Multi function display for nav station below decks, new Nov 2016
Wind displays new Nov 2016 – incorporating – a I60 wind display unit; a I70 multifunction display for depth etc.; plus a Close Hauled wind display.
GPS Ray Marine
Radar Furuno 64 nm radar
Chart Plotter Ray Marine hybrid touch E70023 chart plotter mounted at helm 2020.
Magnetic compass Suunto D-165
Gyro Compass 1
VHF Icom VHF IC-M502– 2003 dual station
SSB Skanti 400w HF radio
Computer Onboard PC computer system interfaced with CCTV
ASPIRATION has a classic style interior finished in teak with satin finish. The interior was hand built with custom care by Nautor’s craftsmen using the best yacht practice and first grade materials.
Aft helm / working cockpit.
Large centre cockpit with dining table suitable for outdoor informal dining.
Access to the lower deck is by two companionways. The first one aft from the aft cockpit serves the owner’s cabin – from where you can also go forward to the navigation station situated just forward of the cabin.
The main entrance leads from the main central cockpit and leads into the main saloon.
The main saloon is located amidships and is full beam. To port is the dining area with ample space for eight guests and to starboard is a seating arrangement.
The galley is open plan and is located just aft of the main dining area on the port side.
The passageway leading aft to the Owners cabin is on the starboard side going aft.
In this passage way one can find the second “crew” cabin with its ensuite, this cabin is finished to Owner’s standards and could be a 4th guest cabin should there only be two / three crew members.
Just aft of this is the navigation station. This also serves as the yacht’s office. All wind instruments are repeated here. During crossings an extra bulkhead can be put in the Owner’s cabin, which allows the navigation station to be accessed by the aft deck hatch whilst maintaining privacy for the owner.
The Owner’s cabin is full beam. The large double bed is on the port side. On the starboard side is a settee. This cabin has ample storage space. The ensuite bathroom is facing forward on the port side. From this cabin there is a companionway to the aft cockpit.
The VIP cabin is located forward of the main salon on the port side. This has a double bed with ensuite bathroom.
Opposite is the twin bed guest cabin (bunk beds) with ensuite bathroom.
The forepeak is crew quarters for two.
(The fo’c’sle was fitted originally fitted with a V berth but has been modified to provide a working area and fitted spares storage and laundry)
Stove & oven Force 10 three burner LPG w/ ALPES 220 VDC overhead extractor fan.
Refrigeration 220 VAC/engine driven Iceberg Eutectic system 3 door side-loading.
Freezer 220 VAC/engine driven Iceberg Eutectic system top & side-loading. Refrigerator, freezer - both serviced Nov 2019.
Cappuccino machine Swiss Jura Ena 9 One Touch.
Sink two (2) stainless steel.
Dishwasher Hafele Oct 2019 fitted in galley.
Ice Maker Isotherm new 2014. Serviced 2019.
Microwave oven Electrolux.
Rubbish bin Teak free-standing
Main saloon 1 x Samsung 46” flat screen on articulated wall mount
Master cabin 1 x Panasonic 22” flat screen
Sound system Bose 5.1 entertainment system with speakers throughout the interior/exterior
Middle cockpit Equipped with 24-VDC refrigeration unit
Computer Ship’s computer in navigation station
SPARS & RIGGING
Mast Carbon fibre mast & boom by Hood Yacht Spars
Mast height 105 feet – 32.24 meters
Hydraulic furler Reckmann unstepped, serviced Sep 2018.
Spinnaker poles 2 x Carbospars
Reaching struts 2 x Carbospars
Standing rigging s/s rod
Inner forestay Kevlar
Running rigging Yacht Braid
Backstay & Vang fitted with Navtec hydraulic adjuster all hydraulic cylinders serviced 2019/2020. New foresheets 2015.
Mainsail North Sails full battened Norlam Dyneema/Carbon SRPC (new 2014).
Genoa Cruising Rolly Tasker Genoa – 202 m2 Tri-radial cut – new January 2016.
Headsail Challenge Performance Cruising warp drive tri-radial cut with 2 ply leach and UV cover protection (2014).
Bombard EXPL-SB500 5-meter Hypalon RIB with centre console (refurbished 2013)
Tender motor - 60 HP 4-stroke Yamaha outboard (new 2014) Serviced 2019, all electric cables replaced Oct 2019, new controller 2020.
Life rafts Two (2) Ocean Safety 6-man
Life rings One (1) w/MOM overboard
Life jackets 12 Ocean Safety MCA inflatable life jackets
EPIRB GME 406 MHz Category I
AIS Ray Marine transponder integrated with chart plotter
Sun bimini, new Oct 2018.
Sprayhood, deck cushions
Chain and anchor, re-galvanised 2015
|Max djupgående med last||3.7m|
|Tank för Färskvatten||2000 l ()|
|Bränsletank||2000 l ()|