Available to order. Duty, delivery and commissioning to the United States included. Italia 12.98 a fast, versatile yacht The Italia 12.98 was born to navigate the oceans. Combining performance with the pleasure and ease of maneuverability typical of all Italia Yachts vessels, the Italia 12.98 is a fast, versatile yacht where performance melds with safety and comfort on board. Exhibiting a safe and powerful behavior along with a soft, delicate touch at the helm, you can rediscover the pleasure of sailing to windward, the essence of true sailing, aboard the Italia 12.98. Specifically designed to be very easy to steer and always light and reactive to the helm, the Italia 12.98 is perfect for long distance sailing and eating up the miles in all weather conditions. Great performance, easy handling The hull lines of the Italia 12.98 manifest a proper balance between comfort and performance, borrowing the fluid concepts developed for the 9.98 Fuoriserie model with regard to the distribution of volumes, while maintaining the key features of the interior in perfect cruising style. The fore and aft rake are more obvious than other models in the Italia Yachts line. The result is a smaller wetted surface area for the benefit of performance in light wind conditions. Aft waterline sections allow a variable dynamic length, short in light wind, longer with increasing speed. We pay close attention to all aspects related to navigation comfort, thanks to a rigorous study on the longitudinal trim and symmetrical volumes while heeled, as well as in the concentration of the weights to limit as much as possible the pitching for comfortable sailing in all weather conditions. Matteo Polli - Italia Yachts Designer Light and strong The hull and deck are built of sandwich cores with PVC of different densities depending on the construction needs. The skins are laid in E-glass (mat, mats and unidirectional) impregnated with vinyl ester resin. The lamination is performed at a controlled temperature between 16 °C and 25 °C. Reinforcing plates are inserted in correspondence of the equipment deck. The central part of the hull is fully laminated to improve the resistance to concentrated efforts. All bulkheads are marine plywood from 15 to 25 mm, bonded to the hull and gusseted to the internal structure and the deck. The deck is bonded with structural adhesive and laminated internally. A structural carbon frame is placed inside the hull, glued and gusseted, to share the loads of the mast, rigging and bulkheads while furniture is fixed over the same. The deck is finished with gel coat surfaces while the cockpit and walkable areas are finished with anti-skid from the female mold. The Italia 12.98 is available with different keel versions. The standard version foresees a full lead ?T-Keel? with a 7' 5" draft. A shallow keel, 6' 5" meters draft is proposed as an option. The rudder blade has a CNC milled mold and it has been designed for high efficiency. The two fiberglass steering wheels have dual steering cables with pedestals containing sprocket and chain. The sector is mounted on aluminum. The stock bearings are self-aligning. Nav pods for instruments at the helm are available as option. Italia 12.98 exterior layout The large cockpit can be closed by a teak-covered folding transom: the ideal solution for quiet, safe navigation and to enjoy easy access to the sea. The sunbathing area on the deck is flat and smooth, thanks to the flush deck hatches. The access to the interior of the cockpit is through a sliding hatch. Large lockers provide plenty of space for storage during the cruise. The furling system is below deck, halyards are collected under the hatch and the spray hood is integrated on the deck leaving a clean, seamless look. Deck layout and main equipment The deck layout is ergonomic and functional, in perfect Italia Yachts style. The large cockpit, free from obstacles, with a wide space for benches permits a smooth transition to the forward cockpit. Particular attention has been paid to the ergonomics of maneuvers, in order to offer an easy and safe sailing experience even in a race with a full crew. All running rigging lines run under the deck. Italia 12.98 provides a "German sheet" mainsail circuit and a lot of features in perfect race style. The back-stay has a hydraulic adjustment, ball bearing blocks and rudder bearings. The self aligning stock bearing, halyards and sheets are constructed in Dyneema®. All these features are available as standard and in conjunction with the rod rigging. A sense of space found in much larger yachts Below deck, the Italia 12.98 has the sense of space found in much larger yachts. With a fine balance between classic styles and contemporary design, the 12.98 boasts a low water line at the beam vital to guarantee high performance. The mood is characterized by wood surfaces with horizontal grains and complemented by the coordinated use of wood finish cupboards and a bright white hull interior creating a stylish and dynamic visual path. An oak finish interior is also available on request.
Available to view strictly by appointment.
Please Note: Due to the varying locations of our yachts, your travel time and the distances that may be involved, we recommend that you only make arrangements to view if you are actively considering purchase.
Contact Erik Haaland; CPYB (410)279-3027 Talk or Text
Italia Yachts USA Sales Director and North American Hylas Yachts New/Brokerage Sales
David Walters Yachts
Port Annapolis Marina
7080 Bembe Beach Rd Suite 111 Annapolis, MD 21403
(410) 279-3027 - Cell
Erik is a Certified Professional Yacht Broker and Florida Licensed/Bonded
Go to www.CPYB.net to learn more about how a CPYB Broker can better work for you!
Please contact Erik Haaland at 410-279-3027
Ytterligare specifikationer, utrustning och information:
LÖA Längd över allt: 42 fot 7 tum
Bredd: 13 fot 8 tum
LWL: 36 fot 2 tum
Min. djupgång: 6 fot 3 tum
Max. djupgång: 7 fot 4 tum
Deplacement: 17526 pund
Ballast: 5952 pund
Höjd över vatten ytan: 63 fot 10 tum
Motormärke: Volvo Penta
Motor typ: Inombord
Transmission: Segelbåts drev