One off 37 ft Cossutti : CE certified for A - category.
she is in ready to race condition!
Cossutti about the Ridas 37:
The One Off 37 is a racer-cruiser designed for the Estonian yard, Ridas Yachts, based in Tallinn.
The boat is fitted with a carbon mast and the sail plan has been developed in collaboration with designers at North Sails and optimized using CFD techniques.
The boat has proven itself highly competitive in the events she has participated in, winning several in the Baltic Sea offshore circuit and placing 3rd in the 2019 ORC European Championship in Sweden, winning a couple of the races during the championship.
Contact Jascha Bach at +31 850609220
Please contact Jascha Bach at +31850609220
Ytterligare specifikationer, utrustning och information:
LÖA Längd över allt: 11.30 m
Bredd: 3.67 m
Max. djupgång: 2.05 m
Total effekt: 30 HP
Propeller: 3-bladig propeller
Motorstyrka: 30 HP
Antal toaletter: 1
Specs One Off Cossutti
North Sails 3Di racing mainsail – 2018, Condition reasonable
North Sails 3Di light jib – 2019, good condition
North Sails 3DL light jib – 2018, very little used
North Sails 3Di light/medium jib – 2018, can be used as delivery/training sail
North Sails 3Di heavy jib – 2020, very good as new
North Sails 3Di heavy jib – 2018, very good condition, though sailis bit too large for the boat
North Sails S1 spinnaker - 2020, good condition
North Sails S1.5 spinnaker – 2018
North Sails S2 spinnaker - 2020, good condition
North Sails S3 spinnaker- 2018, good condition, used very little
North Sails Reacher - 2019
Delivery mainsail with reefs - 2018, condition OK
Delivery jib - 2018
Delivery spinnaker - 2018
Interior from GRP and Airex sandwich ultra light construction with aluminum door frames.
3 cabins with 7 berths plus saloon
Twin folding pipecots berths in forepeak.
Locker space opposite to starboard.
Bunk berths in to port and starboard in saloon.
Forward facing chart table opposite galley to starboard with seat.
Twin double cabins aft with storage lockers.
Alcantara upholstery in saloon
Storage room behind the backrest of saloon seats
Sideboards with stowage space, lockers and shelves
Chart table withseat
Head with electric pump toilet
Webasto 4 kw hot air system with strategically placed outlets under bunks and sofas
Lockers closed off with canvas grey with zippers
Galley Galley aft of saloon area to port, L-shaped
Insulated cool box with refrigerator unit
Cardanic 2 burners stove Origo 2
50L plastic water tank
Electric pressurized water pump, water level indicator
Boat's power supply switch board Philippi with automatic fuses and control lamps
Engine circuit / Boat circuit
3 x 100 AH/AGM batteries
LED navigation lights, roof and reading lamps in all cabins
220v shore power system with Victron 25A battery charger
220v sockets in galley and toilet and main saloon
SonicHub audioserver stereo system with Fusion speakers in cockpit
Deck and Cockpit
Vinylester laminate, Airex sandwich construction
All high loaded areas with solid laminate and aluminum inserts.
Hull and deck connection is glued with Büfa 0110 glue, inside over laminated
Permanently fixed glass on overbuilding.
Antislip on sidedeck, cockpit and seats + heeling supports in cockpit
Carbon steering wheel
Hatches Lewmar smoke glass flush type.
Cariboni hydraulical forestay cylinder operated from cockpit.
Stainless steel pulpits and pushpit with flag holder.
10 stanchions and 2 rows of lifelines.
Harken deck gear
Harken genoa tracks
2x Harken 2-speed self-tailing mainsheet winches
2x Harken 2-speed self-tailing primary winches
2x Harken 2-speed self-tailing control line / halyard winches at companionway
BSI ROD rig
Tuff Luff forestay
Reckman hydraulical mastjack
Track for spinnaker pole
Carbon spinnaker pole
Running rigging Maffioli DSK 78
Hall Spars carbon fibre keel-stepped fractional mast with two-sets of swept back spreaders
Hall Spars carbon fibre boom
Hall Spars vang adjustable from cockpit
German mainsheet system
Cariboni hydraulic forestay cylinder operated from cockpit.
Light grey gelcoat and painted with RAL 7035 PU paint
Hull is fully made of vinylester resin
Reinforced bow section and under WL until the keel area.
Vacuum infused special light and strong laminate with multiaxial reinforcements.
All high loaded areas with carbon fiber and keel frame is from galvanized steel.
Airex sandwich construction. Keel, engine and rudder areas are full laminate
Under WL area is treated with Gelshield 200 epoxy primer and VC17 antifouling
Full lead keel with GRP cover.
Jefa selfalighning roller bearings, carbon rudderstock and rudder
Jefa steering pedestal system with autopilot and Teleflex engine control system
Yanmar 30 hp with sail drive
Gori racing type 3 blade propeller
Dual circuit cooling, fuel filter with water separator
100 L Stainless steel diesel tank, fuel level indicator
Electronics and Navigational Gear
B&G H5000 system
4x B&G 20/20 displays at mast
B&G H5000 graphic displays at companionway
B&G H5000 autopilot control head
B&G ZG100 GPS antenna
At Chart Table:
B&G Zeus3 9” GPS chart plotter at chart table
B&G V90 VHF with DSC and Class-B AIS
Remote control VHF handset
Safety equipment according to ORC International rules, including life raft for 12 and life vests for 12 persons
Electric automatic bilge pump and hand operated bilge pump
Custom Trailer(as an option, not included in the price)
2x light anchors with 10m chain and 2x approx. 30m anchor warps
Fenders and warps
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.