If you are looking for a brand new Lagoon Seventy 7 available now, this is the one ! In a superb Owner's Version with 3 cabins + crew quarters on starboard, you do not have to wait for 2 years ..Launched in February 2019, this large multihulls elegant and very spacious is fully proven and checked by the builder. She just left the Med for spending the winter in the Caribbean.
The master suite is magic with her lateral door hydraulic, converted into a private teak plateform with direct access to swim ...The front cockpit forward with direct access from the salon is superb, the flying bridge gorgeous with different lounging areas, interior volumes are incredible, crew quarters are generous and the galley could easily compete with the ones on larger motoryachts. Each cabin is designed with care.No compromise on a such unit ; you will find all options and equipment expected, I invite you to ask for the detailed specifications !
Cell. +33(0) 6 892 792 06 firstname.lastname@example.org
The deck and the hull are assembled and equipment inside the boat has been installed. The time has arrived for the Seventy 7 to leave the production area where it has been for several months for mast stepping, the final phase for preparing Lagoon's newest ship before its launch.
The mast is positioned horizontally to position the spreaders, attach the rigging and cables, install the electrical systems and put the main sail in place.
Before mast stepping, the deck must be fitted, including installing the winches, cleats and blocks… all the equipment needed for the standing and running rigging.
Next, the mast is prepared by positioning the spreaders and standing rigging, and attaching the running rigging. Afterwards, we install the electronics and electricity (radar, antennas and lighting) and prepare the hydraulic furlers. Then we prepare the boom (attach sheets and reefing lines) and install the main sail. We finish by placing the slings and verifying the shafts.
The actual mast stepping phase requires five people and is done on dry dock. It begins by slinging the mast which is strapped up and attached to the crane to be lifted in vertical position and placed above its position. Once in place over its shoe, it is connected to the stays, lower and intermediate shrouds and detached from the crane.
To finish, the lower and intermediate shrouds are tightened and the initial adjustments are made. The final adjustments are performed after the launch.
The Seventy 7's rigging consists of:
- Aluminium mast with three spreaders. Height 32 metres
- Aluminium boom (optional carbon canoe boom)
- Standing rigging made of Kevlar
- Running rigging made of Dynema
- Genoa hydraulic furler