Close
Close

I'm a boater! Email me yachts and information.


I accept YachtWorld's Terms of Use

2017 Scanner Envy 950 Touring

SEK  1.601.466*
Prissänkning SEK  114.390 (sep 27)
Palamos, Spanien
Intresserad av denna båt? Telefon: +44(0)1590 673715
  • Beskrivning
  • Se alla specifikationer
 

High spec, low hours Envy 950

År:
2017
Längd:
9m
Motor/bränseltyp:
Dubbla / Bensin
Belägen i:
Palamos, Spanien
Skrovmaterial:
Hypalon
YW#:
80212-3708885
Nuvarande pris:
£ 140.000 Skatt/moms betald (SEK  1.601.466) 

High performance luxury cabin RIB from 2017, used lightly and always wintered under cover. Twin Volvo V8-300 inboards with 45 knot potential.

 

FURTHER BROKER’S COMMENTS:

 

High spec, stunning black-hulled Scanner 950 Touring with low hours on her twin Volvo V8-300 inboard engines. Lightly used and always wintered ashore under cover, DHARMA is turnkey and ready to go. Her highlights include:-

  • Teak decks
  • Black hull and Hyaplon tubes
  • Ultra-efficient Volvo V8-300 gas inboards with low hours run
  • Electric anchor windlass
  • Bimini and covers
  • Stereo with Bluetooth
  • Garmin GPS plotter
  • Gas stove and sink
  • Fridge
  • Double berth and heads

 

Spanish-flagged and taxes paid, DHARMA is ready for immediate enjoyment.

 

MANUFACTURER’S COMMENTS:

 

The Scanner Envy 950 is a RIB boat designed by Montemitro Design that can also be used as luxury tender for superyachts. When Montemitro Design created Scanner Envy 950 they did not want to create "just" a rib, but the boat which also gives importance to looks and quality of materials. With length of 9,5 meters and open plan concept the boat can carry up to 20 passengers. To aft there is a cozy living room consisting of sunbathing area, C-shaped aft couch with multifuntctional furniture, fridge, sink and working surface. Scanner has a large dinette which can be converted into another sunbathing area, simply lowering the table. The boat has two cabins, one with toilet, with entrance on command bridge and you get another cabin when you lift the sun deck area.

 

MANUFACTURER’S BACKGROUND:

 

The company has always striven to find increasingly more functional solutions, a policy that paid off in 1993 with the creation of the “SCANNER” project on a national scale. The arrival of SCANNER 590, thanks to her lines and futuristic technical solutions, truly revolutionised the nautical world. Numerous other models followed, created to satisfy the needs of a market looking for a new product combining the comfort and design of a boat with the practicality and safety of a dinghy.

 

Scanner Marine was established on the wave of this success in 2001 and thanks to the experience acquired over the years and successful collaboration with some of the most famous boat engine manufacturers, the company soon became an important reference point for the boat industry in terms of design and innovation.

The drafts, drawings and hull fittings are the result of years of research, testing the products in all sorts of conditions and in the most extreme adverse weather conditions, enabling us to select the very best construction materials and technologies so that the final product achieves perfect harmony with the marine environment.

 

Tests were carried out within the scope of the “SCANNER” project in events such as the Admiral’s Cup and the Whitbread Race, in Greek and Sardinian seas and along the Spanish Coast.

 

The construction of these boats has evolved into the perfect combination of design, speed, functionality, versatility and navigational safety, whilst fully respecting the physical laws that must be dealt with when nature displays its full force to those who dare to challenge her.

 

Scanner is recognised for producing high-quality boats, characterised by original design and excellent seaworthiness.

 

Scanner is represented throughout the world by dealers sharing its company philosophy, who are at our clients’ disposal for technical and commercial assistance.

 

Source - Scanner Marine website

 

CONSTRUCTION

 

RCD Status:

  • Our understanding is that the vessel conforms with the essential safety requirements of Directive 94/25EC (Recreational Craft Directive) – Category B

 

Hull, Deck & Superstructure Construction:

  • GRP hull and superstructure
  • Black gelcoat
  • Black Hypalon tubing
  • Teak decking to foredeck, side decks, aft cockpit and bathing platform

 

MACHINERY

 

Engine & gearbox:

  • 2 x Volvo V8-300 5.3 litre direct-injection petrol inboard engines
  • Outdrive gearbox legs
  • Trim tabs
  • Throttle/gear controls

 

Maintenance & Performance:

  • Engine hours: approx. 369 hours as of Autumn 2020
  • Date of last engine service - annually
  • Cruising speed: approximately 35 knots
  • Maximum speed: approximately 45 knots @ 5.800rpm

 

Propulsion & Steering:

  • 3-bladed propellers
  • Hydraulic steering

 

ELECTRICAL SYSTEMS

 

Voltage systems:

  • 12vDC domestic system with 220vAC via shore power

 

Battery Banks:

  • 12vDC engine start banks
  • 12vDC service battery bank

 

Battery Charger/Inverter:

  • Automatic battery charger
  • 12v/220v DC/AC inverter

 

Shore Power:

  • 220vAC shore power connection

 

PLUMBING & GAS SYSTEMS

 

Fresh Water:

  • Water is pressurised by 12vDC high-pressure pump system
  • Cold freshwater pressurised water supply

 

Bilge Pumps:

  • 12vDC electric bilge pumps

 

TANKAGE

 

Fuel:

  • Approx 540 litres fuel tank capacity

 

Fresh Water:

  • Approx 230 litres water tank capacity

 

Holding Tanks:

  • Black water holding tank

 

NAVIGATION & COMMUNICATION EQUIPMENT

  • Garmin chart plotter with GPS
  • Compass
  • Icom VHF

DOMESTIC EQUIPMENT

 

Exterior galley Equipment:

  • 12vDC refrigerator
  • Gas stove
  • Sink with cold tap

 

Heads & Shower:

  • Electric marine heads
  • Cockpit shower
  • Outdoor sink

 

Entertainment:

  • Kenwood stereo system with speakers

 

ACCOMMODATION

  • 2-berth in forward double berth with cabin cushion set
  • Heads

 

DECK EQUIPMENT

General:

  • Transom shower
  • Swimming ladder at bathing platform
  • Cockpit table
  • Cockpit wetbar with sink and fridge
  • Cockpit seating

 

Anchoring & Mooring:

  • Bow anchoring system
  • Anchor with chain/warp
  • 12vcDC electric anchor windlass
  • Mooring cleats
  • Warps & fenders

 

Covers, Cushions & Canvas:

  • Bimini
  • Console covers
  • Sunbathing cushions

 

SAFTEY EQUIPMENT:

 

General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.





VIEWING ARRANGEMENTS

 

Lying: Palamos, Spain

 

Available to view strictly by appointment

 

Office Hours Mon- Fri 0900 – 17.00

Saturday by prior appointment

                                                         

For more information or to arrange a viewing please contact us.

 

Please Note: Due to the varying locations of our yachts, your travel time and the distances that may be involved, we recommend that you only make arrangements to view if you are actively considering purchase.

 

Tel: +44 (0)1590 673715 Email: enquiries@grabauinternational.com



Please contact Alex Grabau at +44(0)1590 673715

Intresserad av denna båt? Telefon: +44(0)1590 673715
Besök webbsida
*Detta pris är baserat på dagens valutakurs.
Email Us
Ange ett giltigt namn!
Ange en giltig e-postadress!
RE: Scanner Envy 950 Touring, Palamos, Spanien
Meddelandefältet kan inte lämnas tomt!
skickar…

Telefon: +44(0)1590 673715
Grabau International

82 Gosport Street , Hampshire
Lymington, Hampshire SO41 9BD
United Kingdom

Grabau International
Ange ett giltigt namn!
Ange en giltig e-postadress!
Meddelandefältet kan inte lämnas tomt!
skickar…