Endless Summer is the answer to anyone who appreciates the mid cabin master of a Sabre 48, but wants a more open, flexible salon layout. The owners worked with the Sabre design team to create a unique, custom salon that feels materially bigger than the standard layout. It includes comfortable recliner seating, larger retractable HDTV, hi-low dining table, built-in ice maker, settee extension for additional sleeping and more. The totally re-imagined utility space improves storage, functionality and access without imposing on the salon. It includes a full size washer and dryer to storage for golf clubs to spare parts to provisions for extended cruising---this utility space can hold it all!
Other highlights include:
2016 model year updates including extended hardtop for a more integrated, under-mount SureShade, hinged salon entry door in lieu of bi-fold door and two Stidd 500N helm seats mounted on pedestals.
Extensive Garmin Electronics, Intellian SAT TV, WIFI and antenna and router.
Complete with long list of factory and custom options designed for cruising comfort and functionality.
Recent bottom and running gear treatment with top of the line products.
Fresh exterior varnish, finished with Awlbrite.
Complete machinery service including engines, pods, generator and 500 hour service including after coolers (March 2019).
Endless Summer deserves inspection and serious consideration. Preliminary listing and photos attached, more details, photos and videos to follow.
Christopher DiMillo, Listing Broker
(207) 671-3292 cell or text
Please contact Chris DiMillo at 207-671-3292
Ytterligare specifikationer, utrustning och information:
Designer: Sabre Design Team
LÖA Längd över allt: 52 fot 3 tum
Bredd: 15 fot 4 tum
LWL: 47 fot 6 tum
Max. djupgång: 3 fot 9 tum
Deplacement: 35000 pund Torrlast
Höjd över vatten ytan: 14 fot 2 tum
Ståhöjd: 6 fot 6 tum
Bottenvinkel vid akterspegel : 14 ° at Transom
torrvikt: 34700 pund
Total effekt: 1100 HP
Motortyp: QSC 8.3
Motor typ: Inombord
Transmission: Pod Drive
Motorstyrka: 550 HP
Motortyp: QSC 8.3
Motor typ: Inombord
Transmission: Pod Drive
Motorstyrka: 550 HP
Garmin GHS20 VHF Wireless extension (Master State Room)
Garmin VHF 300 Radio
Garmin AIS600 AIS transceiver
Garmin GSD25 Premium Sonar Module
Garmin GXM52 Sirius XM Antenna
B4-409S I4 Intellian Sat. dish
SSID:Garmin service set identifier
Rouge Wave pro wifi antenna with router
Garmin GC 10 Standard image cameras (2x engine room)
Garmin GC 10 Reverse image camera
Direct TV Main Salon
Direct TV MSR
Direct TV FWD
Accord Shades on all opening ports except on the master head opening port.
Ultraleather on custom main salon settee.
Custom main salon layout.
Delete port side sliding seat and the mates seat.
Move the utility room hatch to the center of the main salon, hinged on port side.
Remove TV from fwd port cabinet. Leave the electrical panels in the standard location.
Install an icemaker w/ a ss face aft and outboard of the nav desk with a compass rose and high gloss table top.
Build an end table with a hinged top opening to bottle storage and 2 small drawers below with a compass rose and high gloss finish on top.
End table will have 2 reading lights installed on it.
2 Stidd seats on pedestals at the helm.
Add single SS cup holder outboard of joy stick.
Stidd cup holder on inboard arm rest of inboard Stidd seat.
Install a step under the helm side door for easier access.
Upgrade cushions on custom stbd settee. Add a better knee roll and memory foam inserts in seat port of cushion. Knee roll to terminate at the end of the end cushions. It does not curve around the end of the inboard cushion. No arm rest on the inboard side of the settee.
Upgrade to a 40" TV in main salon.
2 Custom ottomans with a removable upholstered top and storage inside that fits below the table pedestal on either side. Ottoman top to be upholstered the same as the settee Base of box to be cherry.
Install an icemaker aft and outboard of the nav desk with a compass rose and high gloss table top.
Create and build an extension to the fwd end of the main salon settee. Extension cushion should attach to the inboard end of the settee and be removable with a folding legs for easy storage in utility room.
MASTER STATEROOM AND HEAD
8" Latex core mattress in master stateroom.
Passageway doors to Master Stateroom and hanging locker doors to be cherry panel doors with the mullions in lieu of Shoji panels. Bulkhead aft of stateroom doors to be solid cherry panel. Standard Shoji door to master head and on outboard opening port sliders.
Ocean Air room darkening shades on master opening ports, master hull port and head opening port.
Add additional chrome towel bar on the aft bulkhead of the master head. Install bar at the same height at the standard bar on the inboard bulkhead.
Install mirrors in the 3 frames that hold standard tile.
Add a cherry fiddle in the master head outboard of the sink, located to match the cherry trim below the mirror.
Build cherry panel doors in cabinet in master head.
VIP STATEROOM AND HEAD
In the VIP head install second cherry towel rack on inside of door, location 10" below top of door.
Add a mirror to the bottom half of VIP head door.
Install a sweep on the bottom of the VIP shower door to prevent water leakage into the head.
Build cherry panel doors in cabinet in guest head.
In the galley, open up the storage cubby just aft of the exhaust, so that the opening is at least 8" wide x 12" tall with 110V outlet for storage of coffee maker. Install a removable fiddle at the front of the opening for a coffee maker.
Build flat bottom in locker under cooktop.
Change glass cabinet in galley aft of sink to have glass doors and one cherry shelf with a fiddle, no rope lighting.
Install S42SE galley storage racks below the galley sole. 1 rack running aft of the aft sole hatch, 1 rack running fwd of the fwd hatch sole.
Add hydraulic lift to the utility room hatch in main salon sole.
AC vent from galley unit into utility room with adjustable closable vent.
Custom layout in utility room.
Build drawers under crew seat location.
Build custom shelves outboard starboard, increase the width of the space to store the extension cushions to the settee and a 20" folding bike.
Asko brand W/D location port side aft. Fwd most appliance doors hinge fwd, aft appliance door to hinge aft. Shelves with fiddles fwd of W/D outboard port.
Inverter/charger 3000 watt true sine wave with remote control.
Beam central vac system with (2) outlets and a 32' expandable hose.
Searchlight dual beam mounted on hard top mast.
Install 120VAC outlet in master cabin at headboard in fwd bulkhead. Standard 120VAC outlet in aft bulkhead.
Install 12V/USB charger at head of master berth on the fwd end.
Install 12V/USB charger in the stbd side of the helm shroud facing the triangle window.
Install strip lighting behind valance port and stbd in main salon. Iinstall on inside of valance up high, not on the top surgace where blinds are installed. Switch to be located at the companionway in the standard bank of switches.
Install (1) 120 VAC outlet in cabinet aft of the main salon settee.
Install (1) 120VAC outlets above the cabinet aft of the main salon settee.
Install (2) 120VAC outlets in the utility room onthe fwd bulkhead 1 port (standard) and 1 starboard (custom).
Delete the standard martini lights from the main salon port and stbd. Install 2 Quick Maya 60 reading light on the top of the end table.
Install (1) 120VAC outlet above the ice maker, below the nav desk facing at as far outboard as possible.
Install Fusion AV750 series stero with built in Bluetooth and 4 speakers. No universal docking station.
Install the vessel view display above the standard drop in box on the angled portion of the helm. Install the Fushion stereo head above the vessel view. Align units above box.
Reverso oil change system.
Shore water inlet.
Single Seagull water purifier on galley cold water plumbed to separate spigot.
Single Seagull water purifier on ice maker.
Fresh water wash down forward.
Post side only, install secondary raw water shut-off valve at sea strainer.
Replace Jabsco accumulator tank with Headhunter tank.
Storage shelf over batteries. Shorten the aft end of the shelf over the batteries as much as possible for access to the strainers. Shelf over batteries to start approx 8" aft of the aft side of the stringer giving clear access to the strainers below.
EXTERIOR AND DECK
FRP molded mast, separate radar platform & satellite pads for sedan hardtop.
Kahlenberg triple chrome horns.
Hot and cold transom shower.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.