- Se alla specifikationer
- Enkel / diesel
- Belägen i:
- Stockholm, Sverige
- Nuvarande pris:
- EUR 175.000 Skatt/moms ej betald (SEK 1.826.114)
"Datacom" is a MAT 1180 designed by Mark Mills and built in 2016.
She is hull #5 and optimized for the ORCi rating rule, where she has proven extremely successful.
Highly upgraded beyond the initial build specification allows her to punch above her weight, whilst maintaining that rating edge.
These MAT 1180's have taken victories across a huge variety of events, whether it be IRC, ORCi - inshore or offshore.
A hugely fun, yet simple boat to sail that doesn't exhaust running budgets, make this a very good all-round package for someone wanting a bit of "get up and go".
Please contact at +44 (0)23 8045 0000
Ytterligare specifikationer, utrustning och information:
LÖA Längd över allt: 39 fot 0 tum
Bredd: 13 fot 1 tum
Max. djupgång: 9 fot 6 tum
Motor typ: Inombord
Transmission: Segelbåts drev
Ultra thin engine box and bunk tops
Light chart table over fuel tank for navigation
4 pipe cotes for ocean race
Internal grab rails in carbon
Galley with sink, pressurized fresh water and cooker
100 liter flexible fresh water tank
Two manual bilge pumps
Jabsco marine toilet
Racing marelon seacocks and flush valves
Lime Lithium battery system 2x60Ah 16kg in total
LED interior lights
LED navigation lights
Life vest x10
Steel cradle, low high position, galvanized
Spare carbon stanchions
All North Sails.
Sails serviced and stored at North Sails Stockholm.
Largely optimized for ORCi racing.
2016 Main 3Di Raw (recut 2018)
2017 Main 3Di Raw
2016 Main Dacron Triradial, smaller transport
2016 Jib L/M 3Di Raw (recut 2018)
2016 Jib M 3Di Raw (recut 2018)
2016 Jib H 3Di Raw
2016 Staysail for Assy
2016 Code 0 close upwind incl. Cable (needs recut to fit new rig measures)
2017 Code 1 aka Force. Same design as the Fast40 class
2017 A3 new design.
Deck and Cockpit
900 mm composite twin wheels, red
Pneumatic Sliding Hatch, MAT/Diverse Yachting
Carbon tubing between stanchions for low friction
Ceramic upgrades Spinlock
All blocks and hardware Grand Prix version Harken/Antal
Spinlock engine lever
Harken winch upgrade includes;
Primary: Harken 60.2 STP Self Tailing Performa instead of 46.2 STP - later upgraded to Pontos 52.
Main: Harken 50.2 STP Self Tailing Performa instead of 46.2 STP
Pit: Harken 46.2 STP Self Tailing Performa instead of 40.2 STP
Lewmar EvoRace 45 backstay winch upgrade
Harken 52.2 STP Main winch upgrade
Electronics and Navigational Gear
B&G H5000 Hercules CPU
ZEUS²7 Multi-function Display
Aqua 12v SSD server win 2016 server with Expedition
16” Asus usb Display
Load cell pin on forestay, Diverse Yachting. 2x B&G 10/10 at backstays
VMHU Pack 1050mm, carbon wind instrument
AIS RX Carbon+ with GPS
Simrad Precision9 GPS
Simrad HS70 GPS Compass, primary
H5000 3D motion sensor
5x 20/20 HV displays in carbon bracket
2x B&G H5000 Graphic Display
V50 VHF Marine Radio, with AIS and DSC. NMEA2000
GoFree wifi and mast top antenna 4G
DATACOM is fitted with a custom built, upgraded Marstrom carbon rig in high modulus.
This produced a very light section compared to other MAT boats and higher stiffness.
Halyard lock systems on main, jib and code Zero.
Marstrom carbon high aspect racing boom, 12,4 kg
Running rigging: Constantly replaced and serviced by partner Happy Yachting.
Grand Prix level
Backstay: Harken 40.2 STP Self Tailing Performa instead of 35.2 STP
Extra work at deck collar to accommodate 4.75" mast section
Extra carbon internal structure for higher loads on mast and forestay (5 tons)
One step up in chainplates for higher loads
Carbon roller for take down spinnaker system.
Pontos 52 Jib and spin sheet upgrade for high speeds and take down
Modified Vang system for easy handling aft
The MAT1180 is an exciting next-generation IRC race boat design which is the product of a long and careful design, engineering, and development process.
Construction: ISO 12215 Cat A
Hull Length: 11.80 m
LWL: 10.18 m
Beam Max: 3.98 m
Draft: 2.9m (bulb trim adjustment of 100mm)
Displacement: 4.375 kg
Female hull and deck tools
E-glass, carbon fiber, PVC core, epoxy vinylester resin
Vacuum assisted resin infusion
ISO 12215 structural regulations category A
Gelcoat finish on hull, deck and internal structure
Custom draft adjustment from 2500 mm to 2600 mm Replaced!
International VC Tar2 epoxy base coat and VC Offshore Teflon anti fouling for racing
New 2017 2,9m keel and bulb design
Wrapped in black foil for logos, hull white gelcoat under wrap.
*Detta pris är baserat på dagens valutakurs.