The First 36.7 was named Boat of the Year by Sailing World and one of the 10 Best Boats by SAIL Magazine, - the First 36.7 by Farr Yacht Design is a competitive One Design and mixed fleet racer and is outfitted with some of the finest available equipment. The First 36.7 is the perfect choice for racers who want optimum performance along with the value and comfort of a cruiser.
Natalie J, is a 2007 First 36.7 that has been very well cared for. A fresh-water only boat, the owner has spared no expense in outfitting this boat. The hull, keel and structures have been professionally templated and faired to Farr Yacht Designs drawings. Her interior has blond Alpi Wood with Durasuede covered cushions.
She is equipped with the newer, upgraded pedestal set-up at the helm with a 54" double-spoked wheel, updated Volvo sail-drive engine, and many other features. All rigging has been upgraded to optimized to class standards and all of the racing modifications have been done. Carbon Fiber Spinnaker Pole and a full complement of Quantum Carbon/Kevlar Sails used for only 2 weekend regattas. Natalie J is clearly one of the best equipped First 36.7 on the market today.
RCR Yachts Inc. - Sandusky
225 West Water Street
Sandusky, OH 44870
Standard Boat w/Selected Factory-Supplied Equipment
The First 36.7 achieved great popularity in North America primarily because of the dual nature of its Characteristics. More Racer than Cruiser, Stingray is fast around the marks - yet has many of the accommodations reserved for cruising and entertaining aboard. With over 250 boats manufactured in North America and close to 500 worldwide the 36.7 will not disappoint.
One cabin forward, 2 aft cabins, 1 head, L-shaped galley.
The deck is balsa sandwich construction (glass fibre, balsa, polyester resin) for an enhanced strength/weight ratio and for good thermal and sound insulation.
A roughened non-slip surface increases safety over all areas of movement on deck.
An inner deck molding is sealed to the deck to round off the finish.
Access ports are available to service critical deck hardware.
The hull is Solid Fiberglass GRP.
A structural inner molding with unidirectional fabric is bonded and laminated to the hull. Its structural role is important as it takes and absorbs the stresses at pressure points (chain plate tie rods, keel, rudder etc.) spreading these and thereby guaranteeing reduced strain on the hull. The surface to the inner hull makes cleaning easier and provides a better finish.
Custom Upgrade: Professionally done, custom finished epoxy bottom; keel faired to OD specs and burnished to a glass-like finish. Race bottom: all through hulls finished flush; centerline knot meter finished flush and saildrive gasket plate. A $15,000.00 upgrade.
I - 46 ft 5 in
J - 13'0"
P - 45'5"
E - 15'7"
Electrical Supply and management:
This boat is also equipped with many extras including: