49' Goetz IMS 50 '97 "Numbers"
NUMBERS is a very competitive and highly optimized for ORR and PHRF racer in good condition, ready for the next buoy or offshore regatta.
Originally designed by Jim Taylor as Design #95 - 49 ft LOA Grand Prix 'IMS' Racer and built by Goetz Boatworks in Bristol, RI she has gone through complete retrofit and modernization under the expert advice of Greg Stewart from Nelson Marek.
The hull consists of unidirectional and biaxial Kevlar reinforced skins over PVC foam cores, whose density is varied to suit local loadings. The deck is a similar laminate of Kevlar skins over PVC foam, with high compression core and additional laminate in way of all deck hardware. Pre-impregnated epoxy resins are used throughout. Both hull and deck are locally reinforced with unidirectional Kevlar to minimize the longitudinal deflections resulting from the headstay, running backstay and mast compression loadings. NUMBERS, is the third IMS racer of the same name that this office has designed to win the 1997 Admiral's Cup.
Molded Built-in Sink
B&G instrument system, 2016
B&G mast displays (four)
B&G masthead windvane (2016)
B&G DST200 transducer (2016)
B&G Chartplotter (2016)
B&G AC42 Autopilot with hydraulic linear drive
VHF Radio, mast cable to offshore specs
Masthead VHF Antenna
LED Navigation Lights (2016)
Masthead LED Navigation Light (2016)
LED Interior Lights and Floor Lighting
Battery Switch 2 Position
DC Alternator On Yanmar Engine for Charging
12V Batteries (Group 8D)
New Electrical System Wiring (2016)
New Shore Power 110V system and battery charger (2016)
New deck sheet bags (2016)
Awlgrip non-skid deck
Awlgrip hull paint
New bottom paint 2/2020
Cockpit Soft-Deck (2016)
Harken Tuff Luff Foil on forestay (2016) with Kevlar chafe guard
Hall Spars Spinnaker Pole to match bowsprit
Custom bow pulpit to accommodate spinnaker pole
Jabsco Marine Head (2016)
155% genoa track (added 2016) with jib controls
Harken Winches (2 cabin top, 2 primary with pedestal, 2 mainsheet, 2 runners)
NUMBERS comes with two masts, original Southern Spars "canting" rig built in 1997 and a 2003 Hall Spars fixed rig.
Hall Spars Fractional Carbon Fiber 3-Spreader Rig repainted (repainted 2016)
Southern Spars Carbon Fiber Rig (Whitbread 60 extrusion) (original 1997)
All running rigging replaced 2016 or newer
All halyards, jib sheets and jib control lines, and mainsheet (spectra) replaced 2016
Tack line and spinnaker sheets replaced 2018
Several sets of spin sheets & guys (2016, 2017)
Winch spare parts
Call for Sail Inventory
Engine Brand: Yanmar
Year Built: 1997
Engine Model: 4JH2CE with Sail Drive
Engine Type: Inboard
Engine/Fuel Type: Diesel
Propeller: Folding propeller
Engine Power: 50 HP
All seller’s personal effects on board are excluded from the sale of this vessel.