Monk designed pocket battlewagon / turn-key East Coast Canyon boat with a proven design and nice amenities. This particular 260 hp. Cummins B-Series Diesel power provides economy and reliability with reduced maintenance by using a fresh water aft cooler. The "Innovator International 31" is a tournament proven craft dedicated to the art of sport fishing. A 31-footer can't be all things to all people, so why not just target one function and do it right? That, apparently, was the way Jim Jenks (Owner of Innovator) and Edwin Monk (Designer) approached this project. A tremendous amount of research and development have gone into the making of these boats.
It was Jim Jenks of Ocean Pacific Frame, who owned the original boats built. His Yacht / Mother Ship was called the Ocean Pacific, and the fishing vessel was the Innovator. These original boats built were 30' long and made of aluminum, as opposed to the production boat's that were built of fiberglass.
She is a Monk designed Hull, with very wide side Decks, high freeboard and good fuel economy for a twin screw small Flybridge vessel. The unique for its time, reverse-sloped transom was designed to allow the boat to back down at speed when chasing fish. With its many amenities, seakeeping ability, good range, under water side exhaust and economical fuel burn all make this boat a turn-key East Coast Canyon Boat that is a pleasure to operate yet still affordable to run! PRICE JUST REDUCED! CALL TODAY!
Please contact Bill Kocis at 609-439-6159
Ytterligare specifikationer, utrustning och information:
Registrerad i: USA
Skrovform: modifierat V-bottenskrov
LÖA Längd över allt: 31 fot 0 tum
Bredd: 10 fot 6 tum
Max. djupgång: 2 fot 6 tum
torrvikt: 11000 pund
Total effekt: 520 HP
Motor typ: Inombord
Motorstyrka: 260 HP
Motor typ: Inombord
Motorstyrka: 260 HP
Items Upgraded / Installed Since Purchase in 2003 2003 / 2004
X-Changer Oil Transfer System (purchased / installed winter 2003 - 2004) Custom-made Helm chair by Nautical Design (purchased / installed winter 2003 - 2004) Northern Lights Generator purchased from Trans-Atlantic Diesel in 2003 & installed in 2004
Satellite Controller & Speaker Install by MTS Electronics (completed January 2007
Gale Force Soda blasting, bottom stripped completed January 2008
Bow rail replacement by Heritage Towers (completed December 2008)
Fiberglass repair for bow rail replacement by Scott Brown (completed October 2008)
New Head, barrier coat, replace plastic thru-hull fittings, etc. by Cape Harbor Marine (completed April 2008)
Furuno Electronics purchased for new hardtop built (purchased October 2009)
Fiberglass repair for new hardtop by Scott Brown (completed December 2009)
New hardtop, seating, Rupp Outrigger & Center riggers by Heritage Towers (completed winter 2009 - 2010)
Fiberglass repair to close old transducer hole by Scott Brown (completed September 2010)
Simrad AP 2803 Auto pilot (purchased & installed by Electronic Marine Concepts) (Completed February 2012)
New opening ports for forwardd Cabin from Hamilton Marine (completed March 2017)
Inoperable / Non-Working Items
Hot water tank removed from vessel
Exhaust fan in Head does not operate
AC / Heat unit was removed from vessel
Anchor foot controls on bow haven't been used in years. Need to be inspected before use
Starboard side hour meter stopped working w/ AP install. Both engines have approximately 2300 hrs.
Owner's personal gear and items
Located in Cape May, New Jersey
Disclaimer The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.