The Swan 42 was designed by Ron Holland and built by Nautor's Swan and first launched in 1980.
Bluzz's owner (18 years) has upgraded and replaced many of the key componets of this vessel. Repowered with a modern Yanmar 54 hp diesel and replacement of the rod rigging by the local Swan specialists show a owner who cares. Much equipment to do oceans races as well.
Listing Agent: Mik Maguire firstname.lastname@example.org
Cell: 510-552-7272 Office: %10-521-6213
Hull Type: Fin w/spade rudder
Rigging Type: Masthead Sloop
LOA: 42.00 ft / 12.80 m LWL: 33.83 ft / 10.31 m
Beam: 12.96 ft / 3.95 m Draft: 7.80 ft / 2.38 m
Displacement: 22,000 lb / 9,979 kg
Ballast: 9,200 lb / 4,173 kg
S.A. (reported): 802.00 ft2 / 74.51 m2
S.A./Disp.: 16.41 Bal./Disp.: 41.82
Construction: FG Ballast Type: Lead
Builder: Nautor Designer: Ron Holland
Make: Yanmar Model: 54 HP Hrs.: 700
Fuel: 42 gals / 159 L
Main sail and jib at original purchase
Symmetric Spinnaker at original purchase.
Purchased ¾ oz asymmetric
135 genoa less than 3 years old
Recent replacement of all standing 'rod' rigging (KKMI)
Depth / Log / Speed / Wind
GPS / Chartplotter (2)
VHF / AIS
TV / VCR / DVD / CD Player
Balmar 120 amp Alternator
Galley with stove/oven, upgraded 'cold plate' refer, S/S sink, microwave.
Port & Starboard settees with centerline table
Chart table area.
V-Berth forward with line storage.
Aft double berth and single berth.
Nautor woodwork throughout.
Head with H7C H2O and shower.
Pickled watermaker, Spectra VT150 (150 gals p/day)
Spinnaker pole / Whisker pole
Bottom painted October 2019
Last survey about 5 years ago
Last engine service October 2019
Engine hours approximately 250
Maintenance records are available.