The Hinckley 40 Cutter is one of the most beautiful and best performing sailing yachts that Hinckley built during the 50's.
Behold, the restoration of "Desperado" is as complete and beautiful as one could ask for!
This boat has huge "Wow Factor"
Designed by Norman G. Owens of Owens Boatworks in Baltimore, Maryland and first produced in 1946. Owens Boatworks produced 41 of these cutter designs as sleek, powerful, fast , Chesapeake Bay racers. The 3 Owens brothers decided to discontinue production in 1949 and concentrate on power boat construction. The plans were offered to the Henry R. Hinckley Co. and the Hinckley Company built 12 of the wooden cutters in the 50's before shifting to the new fiberglass construction. Only 4 cutters were built with the mahogany hard dodgers--they were referred to as "Doghouses"
There have been 7 previous owners prior to the current owner.
The current owners purchased the boat in 2002 and spent almost 2 years doing a total restoration of "Desperado". The restoration was done by a professional shipwright that lived with the project until she was completed in 2004. An outline of the restoration is as follows:
Restoration of "Desperado" began May 25, 2002
Demo work included removal of all hardware, plumbing, wiring, wheel pedestal, and spars.
Removed teak decking and re-planed for reuse.
Replaced damaged deck frames.
1/2" marine plywood installed over deck frames and epoxy sealed.
Removed fuel and water tanks for inspection and cleaning.
Removed Westerbeke diesel for a complete rebuild.
Removed all varnish from cabin truck and doghouse and refinished with varnish.
Epoxy and faired carvel coachroof
Installed new port glass and bronze port rings.
Sanded hull to bare wood and applied 2 layers of 1/4" marine plywood over existing mahogany hull. The overlay was epoxy saturated, glued and SS stapled to the hull to form a "cold mold" overlay. When cured, the hull was sanded, faired, re-sanded, and fiberglassed from toe rail to keel with 6 oz. cloth and epoxy resin. Hull was sanded, faired, primed and painted with Interlux "Toplac"--Flag Blue.
Installed a new mahogany rub rail with bronze guard, new mahogany cap rail and added 1/4" mahogany veneer to the toe rail face.
Dry-fit, epoxy and screwed the planed 5/8" teak deck onto to the new deck.
Installed new rudder and tiller steering system.
Installed new prop shaft, shaft tube, exhaust system, and engine.
New bottom paint
Launched December 12, 2002.
Rebuilt cockpit to include new combing boards, combing cap, and teak veneer cockpit seats.
Started interior rebuild by removing all settees, galley, and head.
Fabricated and installed new SS 40 gal water tank under vee-berth and fabricated new SS ice box with 3" insulation.
Installed Force 10 propane stove and propane system and new galley sink.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.