The Sunbeam 42ds was built by Schöchl Yachtbau in 2006 and delivered to a longtime Sunbeam owner. This Sunbeam 42ds was exclusively used by the owners family. Since its delivery, it has been exclusively sailed in the Mediterranean.The yacht was already very extensively equipped on the side of the boat is in a very neat condition. Actually, the yacht at Sunbeam Yachts in Northern Italy on shore. The owner would like to sell his Sunbeam 42ds for age reasons.
Die Sunbeam 42ds wurde von Schöchl Yachtbau 2006 gebaut und an einen langjährigen Sunbeam-Eigner ausgeliefert.Diese Sunbeam 42ds wurde ausschließlich vom Eigner privat genutzt.Sie ist seit ihrer Auslieferung ausschließlich im Mittelmeer gesegelt worden.Die Yacht wurde bereits werftseitig sehr umfangreich ausgerüstet.Das Boot befindet sich in einem sehr gepflegten Zustand.Aktuell ist die Yacht bei Sunbeam Yachts in Norditalien an Land.Der Eigner möchte seine Sunbeam 42ds aus Altersgründen verkaufen.
Please contact Gunther Ambrosi at +43 6217 55810
Ytterligare specifikationer, utrustning och information:
Registrerad i: Tyskland
LÖA Längd över allt: 12.60 m
Bredd: 4.40 m
LWL: 11.15 m
Max. djupgång: 200.0 m
Ballast: 4000 kg
Ståhöjd: 2.08 m
torrvikt: 12500 kg
Total effekt: 75 HP
Motor typ: Inombord
Propeller: 3-bladig propeller
Motorstyrka: 75 HP
Dusch i sittbrunn
Fäste för utombordsmotor
Teak i sittbrunn
Sittbrunnstält - Full Cover
Manufacturer Provided Description
The DECK LAYOUT offers the crew comfortable working and relaxing areas. An ergonomic concept with practical control capability direct from the safety of the centre cockpit. The standard equipment delivered with the SUNBEAM 42DS is a fine example of Schoechl Yachtbau's understanding of requirements for active and passive safety on board. With a laid teak deck and solid teak toe rails, genoa sheet tracks leading very far aft with Sunbeam turning blocks for a clear cockpit, side gates in the lifelines, stainless steel pushpit with bathing platform and bathing ladder, recessed jib tracks and deck fittings and lots more that lends to your personal safety. This includes a roll reef genoa and roll reef main sail with a minimum clearance of 2 meters under the boom. THE CONCEPT of the SUNBEAM 42DS is based mainly on a formal appearance, proven technics and optimal sailing qualities. In the development, the aim has been to achieve the highest possible cruising comfort, (also for small crews) and the result is shown by the highest level of operating safety with a minimum of required effort. The strong points of the SUNBEAM 42DS are the innovative technology, the extravagant building technique, the hand laid laminate carried out under the supervision of "Germanic Lloyds" and the complexity of the standard equipment.
Chosen top-grade woods are used for the interior fittings. This reflects the tradition and the high-quality craftmanship of the boatyard.
A good-quality teak floor creates a warm and comfortable atmosphere.
Elegant interior design, special Sapeli mahogony, rounded edges, silky smooth surfaces and a choice of upholstery materials.
A special three-layer painting process makes the built-in fittings long-lasting. The paints do not contain colour additives, which simplifies any repairs.
well-formed wooden strips, glued in one piece, can be used as handrails.
Standing room approx. 195 cm., ergonomic seating and backrests. All edges of furniture and fittings are rounded off.
Bilge pump 38mm (manual).
Bilge pump electric, automatic.
Acoustical alarm for bilge pump in panel.
The tasteful wood panelling on the hull endorses the maritime impression.
Numerous storage spaces with anti-rolling edges at front of boat.
The stern cabin is extremely comfortable, with double bed and bedside tables, lit wardrobes and many other storage possibilities.
Ergonomically-formed, comfortable cushions made of fleece and foam-rubber, with buttons to keep them in place. Cushion covers are detachable.
Modern system of securing curtains by use of a panel the full length of the saloon.
Wet cell aftships has toilet with septic tank, washbasin, shelves in artificial stone look, cupboard, mirror, separate shower-room, flexible shower head, acrylic shower door and electric drainage pump.
Wet cell in foreship has toilet, washbasin, shelves in artificial stone look, cupboard, mirror and shower with flexible shower head.
Choice of materials from our standard collection gives the fittings a personal note.
manual toilet in the forward head
manual toilet in the aft head
A simply operated motor panel with rev.counter, engine hour-counter, optical and acoustical alarms, all protected by an acrylic cover.
Water pumped electrically by "one-handed" mixer tap.
Top safety in gas system provided by remote gas regulator with solenoid switch vent.
Built-in refuse bin.
High output diesel engine, 75 BHP, 55 kw, 4-cylinder, dual-circuit cooling, shaft-driven, shaft block made of high-grade steel.
Engine room centrally positioned for easy servicing, accessible from all sides, insulated with aluminium/foam sound proofing, and including automatic lighting.
Water-cooled refrigeration system with compressor and cool-storage plate, low energy use, fridge divided in two with two lids, volume 110 litres.
Diesel tank in high-grade steel, little maintenance needed. An inspection hatch is provided for small services, - also a drainage pipe with hose connection.
Warm water boiler, heated by engine, 230 V, volume: 24 litres.
Galley with work top in artificial stone look, 2-ringed gas cooker and oven, semi-cardanic, cupboards for crockery, ample room for pots and pans under work top, chromed taps and electrically pumped water supply.
High-grade steel water tanks with inspection hatch, gooseneck for ventilation, chrome filler pipe.
Automatic septic tank in high-grade steel, 58 litres, drainable and suctionable, 1 aft.
Well-formed chart table, cupboard for charts, plenty of room for navigation instruments.
Wooden cladding on the side walls in the cabin forms excellent insulation, as does the sandwich- formed lining in deck.
Cupboards have ventilation slits.
Optimal sleeping comfort due to circulation and ventilation fittings under the mattresses. Foam cushions
Mains on bord 12 volt, cables in cable conduits, optimal protection against corrosion through use of galvanized copper, dimensions according to customers requirements.
Bow and stern lights use LED technology.
Economic vapour and deck lamps.
Economic anchor light at mast top - LED technology.
Switch panel easily accessible and easy to read with automatic fuses. Ammeter and voltameter for starter and board batteries.
1 board battery 200 Ah, AGM technology, little maintenance, non-vapourizing
2 reading lights in foreship.
2 reading lights aft.
Extensive spot lighting in saloon, 12 V
1 starter battery 75 A, AGM technology
Echo-sounder ST60 AH
Speedlog ST60 AH
Wind indicator ST60
230 V sockets: 2 in galley, 1 in stern, 1 in foreship, 1 in navigation.
230V sockets: 1 in stern wet cell.
230 V sockets: 1 in foreship wet cell.
12 V socket: 1 external.
12 V socket: 1 in interior navigation area.
Battery charger 45A with plug for land cable and 230 V socket.
Night lighting in saloon flooring.
Automatic lighting in cupboards
The hull is durable and high-grade due to full lamination. Osmosis protection with ISO/NPG resin in the first three layers and a topcoat sealing in the interior.
Good in upwind conditions and smooth engine start, ample room for anchor chain, extended room in bow and a slim front combined with an even stern frame present a longer waterline.
Additional deck lining for better insulation against condensation, air buffer between deck and inner lining.
SUNBEAM yachts are well-protected from distortion, due to the reinforced plastic framework which is adhered to the hull and completely laminated.
Rigging is distributed throughout the hull by extensive laminated carriers and the extremely secured mast supports.
Maximal hull stability due to laminated bulkhead.
Reduction in weight due to extra light and particularly strong sandwich-type bulkhead.
A long-lasting, high-quality surface is guaranteed by a handpainted gelcoat.
Osmosis prevented by an under water primer incl. antifouling.
Collision point in the bow and laminate at the front of boat are reinforced.
Rudder shaft in full high-grade steel provides maximum safety, also the special construction of the rudder blades.
High-grade steel ball-bearing gives rudder smoothness and flexibility.
Smooth, balanced rudder. Rudder blades fully laminated and solid.
Lead keel makes for low-lying gravity point. Optimal safety with high-grade steel keel bolts and an additional reinforced laminate in keel area.
Laminated reinforcement on all deck metal and wooden fittings.
The hull is laminated by hand in one complete piece. In this way the strength is equally distributed and the durability ensured for the life of the boat. The power of the keel is extensively and evenly distributed.
Sandwich- foam is integrated in the deck through a gelcoat in ISO/NPG resin to create optimal insulation, stiffness and a reduction in weight.
The first 3 layers of ISO/NPG resin protect against osmosis.
100% sealing with a fully laminated and bolted hull-deck combination --- guaranteed!
The particularly strong deck-hull connection is attained by the additional laminate. At this point there is naturally also the anti-scouring strip, the combination of which creates a certain thickness and thereby increases safety .
Footrails in solid teak creates a good visual effect
Saftey central cockpit, power assisted steering, compass on steering shaft illuminated, 2 cubby holes, floor and seats in teak.
Ample storage space and 2 small shelves in cockpit.
Anchor chain 10mm, galvanized, 70m.
Bow protected with high-grade steel.
Steering wheel with safety bar and ring for lifebelt attachment.
Bow fittings with double anchor lines.
Electric anchor winch 1200 W operated by hand.
Emergency tiller, operated on deck, is simple and easy to reach, to put into operation and to mount.
wide wooden steps for easy access from water.
Stern pulpit in high-grade steel.
Bow pulpit in high-grade steel, with access including steps in teak.
Generous bow and stern clamps.
Generous spring clamps.
1 hatch in foreship.
2 hatches in saloon
1 hatch in aftship.
The many hatches provide a comfortable and pleasant atmosphere, some of which can be opened.
Generous stern lockers.
High-grade telescopic steel springs on locker tops.
Flag-staff without flag.
Granny bars port and starboard.
Ropes and fittings can be operated directly from cockpit. Also a safety feature.
Electric halyard winch starboard.
Automatic halyard winch in cockpit.
Stopper in cockpit for diverted lines.
Deck in solid teak, no screws, constructed in vacuum process with adhesives. This process increases the durability of the deck.
Floor and seats in cockpit in solid teak, constructed by vacuum process.
Self-tailing Genoa winches, 2 gear.
Cockpit sill in solid teak.
Foot guard rail in solid teak.
Solid protection with high-grade steel.
Hauling point slide adaptable from cockpit.
Hatches in saloon open to foreship.
Instrument bracket over sliding hatch.
Gooseneck for laying cables below deck.
Guard rail gate port and starboard.
Solid guard rail in high-grade steel, diameter 25mm.
Sliding door at companion-way with window.
The bases of guard rail supports are of high-grade steel and unbreakable.In this way the supports are solidly fixed to the sill edge.
Foldable safety rings for lifelines on deck, port and starboard.
Main sheet traveller system can be operated from helmsman's seat
Mast, Rig, Sail
Front lower shrouds
Stern lower shrouds
Deflect block at mast heel
This expendable rigging conctruction reduces the top weight of the mast, so that the yacht reacts to the waves more comfortably and it is easier on the rigging.
In order to keep walking space free, the Genoa lines are under deck.
Jip sheet and main sheet
maximal comfort and safety with a rolled mainsail, in Dacron, short verticle slats, reff ropes operated from cockpit.
One-rope reff system,- easier sailing for a one-man crew. Reff rope operated from cockpit.
Dual sheet system ensures tidy cockpit and easy operation of main sheet. Main sheet can be operated from both sides, - main sheet traveller with bearings.
A foam inlet has been sewn into headsail front to keep correct profile when reffed. After leech and fixed foot rope in Dacron.
Rollreffing system for Genoa.
Lines for headsail and mainsail in Dynema which provides continual tautness and constant sailing profile.
Masthead rigging gives maximum stability and prevents "pumping".
Modern double spreader rigging.
A strong boom kicker is mounted for optimal trim in light winds and increased safety.
An automatic halyard winch is fitted to mast to enable easier usage.
Weather vane at top of mast.
Mast is earthed at keel for potential balance.
Tanks are earthed at keel.
Optimal direction of power due to flexible bolts on the chain plates
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.