The Colin Archer 45 is a very steady isolated boat with a width of 4.7 m and an internal height of 1.85 to 2.40 gives the boat an unbeatable volume and is suitable for both longer sailing and living on board .The boat is Ketch rigged with furling sails and have good sailing skills.
She is very heavily built, with 6-8 mm steel and with 70 mm isolation. The boat has also a wind rudder from Sailomat.
A 105 HP six-cylinder Chrysler Nissan Marine Engine 3.3 L with hydraulic gear from Borg Warner. Hydraulic bow thruster and anchor as well as an Erikson disaster pump at 500-700 l / min mounted on the shaft.
There are only 3 valves below the waterline, waterproof collision area to the forehead and center lift with 2 calibrated loops.
Heating and hot water are available through a 5 kW Reflex heater, heat exchanger from engine and 3 x 700 watt electrical heater. Water heating with thermostat controlled radiators and the shower is also heated.
220V passes through a protection transformer. Dual 24v generators and one 12v. Solar panels of 3x50 w and wind/water generator Aquair 100, battery charger 12 and 24V, inverter and new batteries.
Well-isolated freezers and refrigerators with air and water-cooled compressors. Above the stove is a stainless steel hood with extractor fan.
Seat and back cushions in 12-15 cm foam. High quality textiles in all pillows.
Large stow in the stern ship with space for everything that you consider necessary for long seals. For warmer days there is a bimini.
The boat is also delivered with a three-part winter cover.
Contact agent for full presentation
Mail : firstname.lastname@example.org
Cell: +46 70 5363301