1978 Nautor Swan 411

SEK  936.040
Ameglia, Italien
Intresserad av denna båt? Telefon: +44(0)1590 673715
  • Beskrivning
  • Se alla specifikationer
 

Iconic S&S Swan 411

År:
1978
Längd:
13m
Motor/bränseltyp:
Enkel / diesel
Belägen i:
Ameglia, Italien
Skrovmaterial:
Glasfiber/GRP
YW#:
80212-3155140
Nuvarande pris:
EUR  94.000 Skatt/moms betald (SEK  936.040) 

Beautiful S&S Swan 411, RIFF is an easy to handle classic S&S design, perfect for taking part at the best regattas and classic meetings. RIFF also benefits from great ongoing maintenance from her loving owner.

 

FURTHER BROKER’S COMMENTS:

 

RIFF, is a Swan designed by Studio Sparkman & Stephens of New York and built as hull n. 031 by OY Nautor in

the spring of 1978 for an American shipowner named SPIRIT OF KARISMA. Returned to the Mediterranean from Rhode Island in 1998 under English flag, it is bought by the current owner in 2001 who has constantly kept it up to date in equipment and interior. Registered since that year at the Italian Register.

 

Over-sized like all the Swans of those years in equipment and quality of materials, today she has the unique charm of classic, safe, highly performing boat in heavy airs.

 

In the warmth of her teak-lined interior, RIFF offers an owners cabin with double bunks and guard bunks, a large chart table area with forward facing seat, a generous galley with oven, a hob and fridge, a double dinette that can be converted into beds and two long pilot berths outboard. Towards the bow there is a heads and a shower room. The bow has two bunks and large under lockers for sails.

 

Externally, RIFF benefits from a well-sheltered and well-protected aft cockpit with original removable Nautor teak table, complete instrumentation, raised rack and companionway entry into the bridge deck area. Ample interior ventilation is afforded by numerous dorade vents, protected by stainless steel pulpits.

 

The rig features a twin-spreader deck-stepped mast, Allspar rod vang, Navtec hydraulic backstay adjuster, refitted wire standing rigging, upgraded self-tailing Lewmar primary winches and recent carbon sails.

 

Extensively refitted in recents years RIFF also benefits from anti-osmosis epoxy treatment in 2006, full refurbished electric systems, refitted interior furnishings, updated skin-fittings, fitment of a Yanmar engine, updated Raymarine electronics and refitting of the bridge deck teak.

 

GENERAL COMMENTS:

 

Designed by Sparkman & Stephens with 42 built from 1977 to 1979, the Swan 411 is the ultimate evolution of the Swan 41 and incorporates new developments in the keel and afterbody shapes as well as a new, larger rig to take full advantage of the increased power of the hull to carry sail. The full skeg rudder has been moved all the way aft for better steering control as well as providing a longer waterline. The Swan 411 is a dream to sail and has the reputation as being a bullet-proof sailing yacht.

 

CONSTRUCTION

 

RCD Status:

  • RCD Status: Our understanding is that the yacht is exempt from the essential safety requirements of Directive 94/25EC (Recreational Craft Directive) as she was built and placed into use within the EU prior to 1998.

 

Hull Construction:

  • GRP laminate hull construction
  • The hull is built of single skin construction. A high proportion of the fibres are unidirectional, giving a stiff laminate with excellent strength and fatigue properties.
  • White gelcoat hull finish
  • Hull epoxy treated - 2006

 

Deck & Superstructure Construction:

  • GRP deck and superstructure construction
  • Teak decking to side decks, cockpit and coachroof top

 

Keel & Rudder:

  • The fin keel with keel ballast is cast lead alloyed with antimony.
  • Cast-in keel bolts are of high-tensile stainless steel.
  • Rudder - Foam-filled fibre glass constructed with a high tensile tubular stainless steel stock

 

MACHINERY

 

Engine & gearbox:

  • Yanmar 4JH2E 4-cylinder naturally aspirated diesel engine producing 65hp - 1996
  • Engine control via single lever control
  • Freshwater cooling with heat exchanger and raw water intake and strainer.

 

Propulsion & Steering:

  • Wheel steering with helm pedestal and hide covered stainless steel wheel
  • Shaft drive with stainless steel shaft driving supported by p-bracket
  • 3-bladed propeller

 

ELECTRICAL SYSTEMS

 

Voltage systems:

  • 12vDC engine and service systems with 220vAC via shorepower
  • 12v systems refitted recently

 

Battery Banks:

  • 1 x 12v engine start battery
  • 2 x 12v service batteries

 

Charging:

  • 12vDC battery charger – replaced 2014

 

Alternators:

  • 12v 55Amp engine-mounted alternator

 

Other Electrical:

  • 220v AC shore-power supply

 

PLUMBING & GAS SYSTEMS

 

Fresh Water:

  • Pressurised hot & cold water pressure system with 12vDC Flowjet pressure pump.
  • Water heated via engine0driven calorifier with 220v AC immersion element in well-insulated 65 litres hot water tank.

 

Bilge Pumps:

  • 1 x ITT electrical bilge pump
  • 2 x Whale manual pump: 1 x cockpit; 1 x steering seat
  • 1 x sea water manual pump

 

TANKAGE

 

Fuel:

  • 130 litres fuel capacity in one stainless steel tank

 

Fresh Water:

  • 325 litres fresh water capacity in two tanks (250 litres and 75 litres)

 

NAVIGATION & COMMUNICATION EQUIPMENT

 

In Cockpit:

  • Raymarine ST60 wind, speed, depth transducers with 5x displays in cockpit – recently fitted
  • Raymarine ST6000 autopilot – recently fitted

At Chart Table:

  • Raymarine RC420 GPS chartplotter – recently fitted
  • Furuno Navtex

 

Communications Equipment:

  • VHF Radio
  • SSB from QSS Electronic USA

 

DOMESTIC EQUIPMENT

 

Galley:

  • Stainless steel gimballed gas oven with 4-burners
  • Stainless steel sinks
  • Frigoboat 12vDC refrigerator

 

Heads:

  • Manual marine heads
  • Hot & cold pressurised showers

 

Lighting:

  • Cantalupi interior lights – recently replaced

 

ACCOMMODATION

 

Summary of Accommodation:

  • 9 berths in 2 cabins plus saloon. 1 head compartment.

 

Accommodation Finish:

  • Burma teak interior joinery made up of faced marine plywood with solid teak where appropriate
  • Teak battening to exposed hull sides.
  • Teak soleboards
  • White vinyl headlinings with teak trim
  • Upholstery in cloth

 

Description of Accommodation from Forward:

 

Forward Cabin

  • V-berth with fold-up pipecots and storage bins beneath. Access to deck through deckhead hatch.

 

Forward Heads

  • Heads aft of forward cabin with sink and lockers to port and heads and shower to starboard.

 

Galley

  • Port side stainless steel sink. Gimballed stove and refrigeration. Stowage in lockers and cupboards.

 

Saloon:

  • Amiships. The saloon has pilot berths port and starboard with a settee seating on each side and a large table with folding leafs

 

Chart Table

  • Located at the aft end of the saloon to starboard. Forward facing chart table with seat and full sized chart table. Lockers and drawers for stowage of charts and equipment. Space for navigation instruments. AC & DC panel.

 

Aft Cabin

  • Double berth to port with further single berth to starboard. Central seat with additional storage.

 

DECK EQUIPMENT

 

Rig:

  • Keel stepped aluminium anodised mast
  • Masthead rig with 2-sets of inline spreaders
  • Harken manual genoa furling system
  • Stainless steel standing rigging
  • Removable inner forestay for storm-jib
  • Jib and genoa tracks on side-decks
  • Navtec hydraulic adjuster for backstay, vang, staysail
  • Deck-stowed spinnaker pole
  • Rod vang
  • Mainsheet track in cockpit
  • Lazyjacks
  • I = 17.53m, J = 5.49m, P = 15.7 m, E = 4.21 m

 

Winches:

  • Lewmar chromed brass winch package
  • 2x 2-speed self-tailing winches for genoa sheets
  • 1x 2-speed self-tailing winch for mainsheet
  • 2x spinnaker winches in cockpit
  • Various winches on coachroof for halyards and control lines including 2x 3-speed winches

 

Sails:

  • Banks Sails Carbon battened mansail – 2011
  • Banks Sails Carbon furling genoa - 2011
  • Neil Pryde Dacron battened mainsail – 2009
  • Neil Pryde Dacron furling genoa - 2011
  • Spinnaker
  • MPS
  • Storm jib

 

General:

  • Stainless steel guardwires and guardwire stanchions
  • Stainless steel pulpit, pushpit and dorade pulpits

 

Anchoring & Mooring:

  • Lofrans Tiger 12vDC electric anchor windlass
  • 18kgs CQR anchor with 50m chain
  • Danforth 12kgs kedge anchor

 

SAFTEY EQUIPMENT:

 

General note on safety equipment: Any safety equipment such as liferafts, Epirbs, fire extinguishers and flares etc. are usually personal to the current owner(s) and if being left on-board as part of the sale of a used vessel may require routine servicing, replacement, or changing to meet a new owners specific needs.

  • 1 MOB unit
  • 6 x lifejackets
  • 1 x liferaft 6 persons




VIEWING ARRANGEMENTS

 

Lying – Ameglia, Italy

 

Available to view strictly by appointment

 

Office Hours Mon- Fri 0900 – 17.00

Saturday by prior appointment

                                                         

For more information or to arrange a viewing please contact us.

 

Please Note: Due to the varying locations of our yachts, your travel time and the distances that may be involved, we recommend that you only make arrangements to view if you are actively considering purchase.

 

Lead Broker: Michele Antonini – Grabau International (Italia)

Tel: +39 333 74 89 281 Email: enquiries@grabauinternational.com



Please contact Alex Grabau at +44(0)1590 673715

Intresserad av denna båt? Telefon: +44(0)1590 673715

Andra båtar från Grabau International

Visa alla båtar från Grabau International
Besök webbsida
Email Us
Ange ett giltigt namn!
Ange en giltig e-postadress!
RE: Nautor Swan 411, Ameglia, Italien
Meddelandefältet kan inte lämnas tomt!
skickar…

Telefon: +44(0)1590 673715
Grabau International

82 Gosport Street , Hampshire
Lymington, Hampshire SO41 9BD
United Kingdom

Grabau International
Ange ett giltigt namn!
Ange en giltig e-postadress!
Meddelandefältet kan inte lämnas tomt!
skickar…